The Upgrade Steps by PC for IRON TV Box

1.Please prepare those device for upgrade as below:

  1 * Computer  

  1 * USB cable

  1*Small iron needle (diameter can not be greater than 3MM)

                             

 

  

2.  Install USB_Burning_Tool_v2.0.7.2 tool as below, after the installation is complete, there is a shortcut icon in the desktop, double-click the icon to open the tool.

3.Copy and Paste the file (usid.ini) to

“C:\Program Files\Amlogic\USB_Burning_Tool\license”

 

4. Set burning options

 

     

 

  

5. Connect the USB port on PC by USB cable

With a small iron needle from the AV hole and hold for 5 second, then plug the USB cable to the motherboard on the OTG interface (the machine's USB2 interface).

Wait until the corresponding port on the tool shows "Connection is successful", then you can remove the small Iron needle from AV port.

 

 

 

6. Open the “File”, then pls go to choose the firmware from your PC .

 

7. Press “Start” after Setting as blow:

 

8. when the bar going to 100%, it means successfully.

  

  

 

9. Boot up and restore factory settings

 

 

Enjoying the new!

Magicsee iron tv box upgrade software link: 

iron S905X: https://mega.nz/#!syoinIhR!C30NPQUHDFviITyMiQUwcaivK4vlJP9nbjBVr6R42-g


iron+ S912：
https://mega.nz/#!AqBHxYIJ!sk9lL6Ton0tandVEZhQaEcql_Nxwe4J9T9QKyo4ee1Y